Lines Matching refs:PF
72 from the administrative interface on the PF. This configuration allows
91 - If Link Aggregation is active, SR-IOV VFs cannot be created on the PF.
166 - You cannot update the DDP package if any PF drivers are already loaded. To
170 - Only the first loaded PF per device can download a package for that device.
403 Accelerated Receive Flow Steering (aRFS) on the PF. aRFS is a load-balancing
495 how many VFs each PF supports, use the following command::
503 Displaying VF Statistics on the PF
505 Use the following command to display the statistics for the PF and its VFs::
512 The PF driver will display a subset of the statistics for the PF and for all
513 VFs that are configured. The PF will always print a statistics block for each
529 For example, the following will configure PF eth0 and the first VF on VLAN 10::
536 If the physical function (PF) link is down, you can force link up (from the
537 host PF) on any virtual functions (VF) bound to the PF.
539 For example, to force link up on VF 0 bound to PF eth0::
556 This setting lasts until the PF is reloaded.
567 trusted VF to request selective promiscuous mode on the Physical Function (PF).
575 If the VM is not trusted, the PF will ignore promiscuous mode requests from the
603 vf-true-promisc-support private flag is only exposed to the first PF of the
604 device. The PF remains in limited promiscuous mode regardless of the
620 packet until a VF driver reset occurs. You can view MDD messages in the PF's
623 - If the PF driver logs MDD events from the VF, confirm that the correct VF
627 - When automatic VF resets are enabled, the PF driver will immediately reset
629 - If automatic VF resets are disabled, the PF will not automatically reset the
835 MAC address of the underlying PF (Physical Function) device.
863 2) spoofchk is disabled from the PF. If you enable spoofchk, the VF will