Lines Matching +full:unit +full:- +full:addresses

15     Addresses scanned: ISA address retrieved from Super I/O registers
19   * Nuvoton NCT5572D/NCT6771F/NCT6772F/NCT6775F/W83677HG-I
23     Addresses scanned: ISA address retrieved from Super I/O registers
31     Addresses scanned: ISA address retrieved from Super I/O registers
39     Addresses scanned: ISA address retrieved from Super I/O registers
47     Addresses scanned: ISA address retrieved from Super I/O registers
55     Addresses scanned: ISA address retrieved from Super I/O registers
63     Addresses scanned: ISA address retrieved from Super I/O registers
71     Addresses scanned: ISA address retrieved from Super I/O registers
79     Addresses scanned: ISA address retrieved from Super I/O registers
87 	Guenter Roeck <linux@roeck-us.net>
90 -----------
132 The mode works for fan1-fan5.
135 ----------------
137 pwm[1-7]
138     - this file stores PWM duty cycle or DC value (fan speed) in range:
142 pwm[1-7]_enable
143     - this file controls mode of fan/temperature control:
146 	* 1 Manual mode, write to pwm[0-5] any value 0-255
152 pwm[1-7]_mode
153     - controls if output is PWM or DC level
159 -----------------------------
161 pwm[1-7]_temp_sel
165 pwm[1-7]_weight_temp_sel
173 pwm[1-7]_weight_duty_step
176 pwm[1-7]_weight_temp_step
181 pwm[1-7]_weight_temp_step_base
185 pwm[1-7]_weight_temp_step_tol
189 -----------------------
193 pwm[1-7]_target_temp
194 			Target temperature, unit millidegree Celsius
195 			(range 0 - 127000)
197 pwm[1-7]_temp_tolerance
198 			Target temperature tolerance, unit millidegree Celsius
205 pwm[1-7]_start
206 			fan pwm start value (range 1 - 255), to start fan
209 pwm[1-7]_floor
210 			lowest fan pwm (range 0 - 255) if temperature is below
214 pwm[1-7]_step_up_time
217 pwm[1-7]_step_down_time
220 pwm[1-7]_stop_time
226 ---------------------
230 fan[1-7]_target
233 fan[1-7]_tolerance
240 ---------------------
250 pwm[1-7]_auto_point[1-7]_pwm
254 pwm[1-7]_auto_point[1-7]_temp
257 pwm[1-7]_temp_tolerance
258 			Temperature tolerance, unit millidegree Celsius
260 pwm[1-7]_crit_temp_tolerance
262 			unit millidegree Celsius
264 pwm[1-7]_step_up_time
267 pwm[1-7]_step_down_time
271 -----------
274 connected to anything and floats, or that it is connected to some non-standard
278 temperature increases (similar to the raw PECI temperature value - see PECI