Lines Matching +full:- +full:temperature
1 Kernel drivers ltc2947-i2c and ltc2947-spi
10 Addresses scanned: -
14 https://www.analog.com/media/en/technical-documentation/data-sheets/LTC2947.pdf
22 voltage, power, temperature, charge and energy. The device supports both SPI
29 to control a fan as a function of measured temperature. Then, the GPIO becomes
30 active as soon as a temperature reading is higher than a defined threshold. The
37 The following attributes are supported. Limits are read-write, reset_history
38 is write-only and all the other attributes are read-only.
41 in0_input VP-VM voltage (mV).
49 in0_label Channel label (VP-VM)
61 curr1_input IP-IM Sense current (mA)
69 curr1_label Channel label (IP-IM)
81 temp1_input Chip Temperature (in milliC)
82 temp1_min Low temperature threshold
83 temp1_max High temperature threshold
84 temp1_input_lowest Historical minimum temperature use
85 temp1_input_highest Historical maximum temperature use
87 temp1_min_alarm Low temperature alarm
88 temp1_max_alarm High temperature alarm
91 temp2_min Low temperature threshold for fan control
92 temp2_max High temperature threshold for fan control
93 temp2_min_alarm Low temperature fan control alarm
94 temp2_max_alarm High temperature fan control alarm