Lines Matching +full:ports +full:- +full:implemented
10 Addresses scanned: from Super I/O config space (8 I/O ports)
18 Addresses scanned: from Super I/O config space (8 I/O ports)
24 Addresses scanned: from Super I/O config space (8 I/O ports)
32 Addresses scanned: from Super I/O config space (8 I/O ports)
40 Addresses scanned: from Super I/O config space (8 I/O ports)
48 Addresses scanned: from Super I/O config space (8 I/O ports)
56 Addresses scanned: from Super I/O config space (8 I/O ports)
64 Addresses scanned: from Super I/O config space (8 I/O ports)
72 Addresses scanned: from Super I/O config space (8 I/O ports)
80 Addresses scanned: from Super I/O config space (8 I/O ports)
88 Addresses scanned: from Super I/O config space (8 I/O ports)
96 Addresses scanned: from Super I/O config space (8 I/O ports)
104 Addresses scanned: from Super I/O config space (8 I/O ports)
112 Addresses scanned: from Super I/O config space (8 I/O ports)
120 Addresses scanned: from Super I/O config space (8 I/O ports)
128 Addresses scanned: from Super I/O config space (8 I/O ports)
136 Addresses scanned: from Super I/O config space (8 I/O ports)
144 Addresses scanned: from Super I/O config space (8 I/O ports)
152 Addresses scanned: from Super I/O config space (8 I/O ports)
158 - Christophe Gauthron
159 - Jean Delvare <jdelvare@suse.de>
163 -----------------
176 misconfigured by BIOS - PWM values would be inverted. This option tries
181 -------------------
183 All the chips supported by this driver are LPC Super-I/O chips, accessed
184 through the LPC bus (ISA-like I/O ports). The IT8712F additionally has an
192 -----------
199 These chips are 'Super I/O chips', supporting floppy disks, infrared ports,
211 is stored in the Super-I/O configuration space. Due to technical limitations,
222 IT8783E/F, and late IT8712F and IT8705F also have optional 16-bit tachometer
224 not compatible with the older chips and revisions. The 16-bit tachometer mode
235 IT8728F. It only supports 3 fans, 16-bit fan mode, and the full speed mode
239 to IT8728F. It only supports 16-bit fan mode. Both chips support up to 6 fans.
241 The IT8790E supports up to 3 fans. 16-bit fan mode is always enabled.
243 The IT8732F supports a closed-loop mode for fan control, but this is not
244 currently implemented by the driver.
251 16-bit tachometer counters aren't used, fan readings can be divided by
273 The driver handles this transparently so user-space doesn't have to care.
284 once-only alarms.
286 Out-of-limit readings can also result in beeping, if the chip is properly
301 -----------------
304 "Smart Guardian" mode control handling is only implemented for older chips
312 read-only.
316 -------------------------------------------
319 which is implemented by IT8705F chips up to revision F and IT8712F
342 -----------------------------
344 The driver supports temp[1-3]_offset sysfs attributes to adjust the reported
345 temperature for thermal diodes or diode-connected thermal transistors.