Lines Matching +full:hardware +full:- +full:triggered
158 - Christophe Gauthron
159 - Jean Delvare <jdelvare@suse.de>
163 -----------------
176 misconfigured by BIOS - PWM values would be inverted. This option tries
180 Hardware Interfaces
181 -------------------
183 All the chips supported by this driver are LPC Super-I/O chips, accessed
184 through the LPC bus (ISA-like I/O ports). The IT8712F additionally has an
185 SMBus interface to the hardware monitoring functions. This driver no
192 -----------
200 joysticks and other miscellaneous stuff. For hardware monitoring, they
211 is stored in the Super-I/O configuration space. Due to technical limitations,
222 IT8783E/F, and late IT8712F and IT8705F also have optional 16-bit tachometer
224 not compatible with the older chips and revisions. The 16-bit tachometer mode
227 The IT8726F is just bit enhanced IT8716F with additional hardware
234 The IT8603E/IT8623E is a custom design, hardware monitoring part is similar to
235 IT8728F. It only supports 3 fans, 16-bit fan mode, and the full speed mode
238 The IT8620E and IT8628E are custom designs, hardware monitoring part is similar
239 to IT8728F. It only supports 16-bit fan mode. Both chips support up to 6 fans.
241 The IT8790E supports up to 3 fans. 16-bit fan mode is always enabled.
243 The IT8732F supports a closed-loop mode for fan control, but this is not
246 Temperatures are measured in degrees Celsius. An alarm is triggered once
250 triggered if the rotation speed has dropped below a programmable limit. When
251 16-bit tachometer counters aren't used, fan readings can be divided by
258 alarm is triggered if the voltage has crossed a programmable minimum or
273 The driver handles this transparently so user-space doesn't have to care.
279 If an alarm triggers, it will remain triggered until the hardware register
281 have disappeared! Note that in the current implementation, all hardware
284 once-only alarms.
286 Out-of-limit readings can also result in beeping, if the chip is properly
301 -----------------
312 read-only.
316 -------------------------------------------
342 -----------------------------
344 The driver supports temp[1-3]_offset sysfs attributes to adjust the reported
345 temperature for thermal diodes or diode-connected thermal transistors.