Lines Matching +full:full +full:- +full:custom

158     - Christophe Gauthron
159     - Jean Delvare <jdelvare@suse.de>
163 -----------------
176     misconfigured by BIOS - PWM values would be inverted. This option tries
181 -------------------
183 All the chips supported by this driver are LPC Super-I/O chips, accessed
184 through the LPC bus (ISA-like I/O ports). The IT8712F additionally has an
192 -----------
211 is stored in the Super-I/O configuration space. Due to technical limitations,
222 IT8783E/F, and late IT8712F and IT8705F also have optional 16-bit tachometer
224 not compatible with the older chips and revisions. The 16-bit tachometer mode
234 The IT8603E/IT8623E is a custom design, hardware monitoring part is similar to
235 IT8728F. It only supports 3 fans, 16-bit fan mode, and the full speed mode
238 The IT8620E and IT8628E are custom designs, hardware monitoring part is similar
239 to IT8728F. It only supports 16-bit fan mode. Both chips support up to 6 fans.
241 The IT8790E supports up to 3 fans. 16-bit fan mode is always enabled.
243 The IT8732F supports a closed-loop mode for fan control, but this is not
251 16-bit tachometer counters aren't used, fan readings can be divided by
273 The driver handles this transparently so user-space doesn't have to care.
284 once-only alarms.
286 Out-of-limit readings can also result in beeping, if the chip is properly
301 -----------------
312 read-only.
316 -------------------------------------------
324 at full speed) while the PWM output of the other 3 trip points can be
342 -----------------------------
344 The driver supports temp[1-3]_offset sysfs attributes to adjust the reported
345 temperature for thermal diodes or diode-connected thermal transistors.