Lines Matching +full:vout1 +full:- +full:en +full:- +full:low

10     Addresses scanned: -
12     Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1075.pdf
18     Addresses scanned: -
20     Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1272.pdf
26     Addresses scanned: -
28     Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1275.pdf
34     Addresses scanned: -
36     Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1276.pdf
42     Addresses scanned: -
44     Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1278.pdf
50     Addresses scanned: -
52     Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADM1293_1294.pdf
54 Author: Guenter Roeck <linux@roeck-us.net>
58 -----------
61 ADM1275, ADM1276, ADM1278, ADM1293, and ADM1294 Hot-Swap Controller and
64 ADM1075, ADM1272, ADM1275, ADM1276, ADM1278, ADM1293, and ADM1294 are hot-swap
67 integrated 12 bit analog-to-digital converter (ADC), accessed using a
75 -----------
77 This driver does not auto-detect devices. You will have to instantiate the
78 devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
85 The shunt value in micro-ohms can be set via device tree at compile-time. Please
90 ---------------------
97 -------------
99 The following attributes are supported. Limits are read-write, history reset
100 attributes are write-only, all other attributes are read-only.
103 inX_label		"vin1" or "vout1" depending on chip variant and
105 			vout1 reports the voltage on the VAUX pin.
109 inX_min_alarm		Voltage low alarm.
121 curr1_lcrit_alarm	Critical current low alarm.