Lines Matching full:active

55 active low or high, the "active_low" argument can be used here.  Setting
56 it to 1 marks the GPIO as active low.
75                           assuming non-active (Polarity = !Pull Bias)
76 Down         Low          as low, assuming active
77 Down         High         as low, assuming non-active
78 Up           Low          as high, assuming non-active
79 Up           High         as high, assuming active
83 is explicit and _DSD is present, will be treated as active with a high
105 Active High. Even for the cases when _DSD() is involved (see the example
106 above) the GPIO CS polarity must be defined Active High to avoid ambiguity.
177           line   0:      "pin_0"       unused   input  active-high
178           line   1:      "pin_1"       unused   input  active-high
179           line   2:      unnamed       unused   input  active-high
180           line   3:      unnamed       unused   input  active-high
181           line   4:      "pin_3"       unused   input  active-high
182           line   5: "pin_4_push_button" unused input active-high
183           line   6:      unnamed       unused   input  active-high
184           line   7       unnamed       unused   input  active-high
185           line   8:      unnamed       unused   input  active-high
186           line   9:      unnamed       unused   input  active-high
187           line  10:      unnamed       unused   input  active-high
188           line  11:      unnamed       unused   input  active-high
189           line  12:      unnamed       unused   input  active-high
190           line  13:      unnamed       unused   input  active-high
191           line  14:      unnamed       unused   input  active-high
192           line  15:      unnamed       unused   input  active-high
232 line in that resource starting from zero, and the active-low flag for that line,