Lines Matching refs:Default
127 it always probe for memory. Default is to use whole detected
206 Default is `every` known device.
239 or panel. Default value is now read back from hardware - so you
246 Default setting is 100 for cards below G400 or G400 without DFP,
251 above for detailed explanation. Default is 640x480x8bpp if driver
261 xres:X horizontal resolution, in pixels. Default is derived from `vesa`
263 yres:X vertical resolution, in pixel lines. Default is derived from `vesa`
266 pixel line of picture. Default is derived from `vesa` option.
268 pulse. Default is derived from `vesa` option.
269 vslen:X length of VSYNC pulse, in lines. Default is derived from `vesa`
272 Default is derived from `vesa` option.
274 pulse. Default is derived from `vesa` option.
275 hslen:X length of HSYNC pulse, in pixels. Default is derived from `vesa`
277 pixclock:X dotclocks, in ps (picoseconds). Default is derived from `vesa`
284 Default depends on `vesa`.
285 depth:X Bits per pixel: 0=text, 4,8,15,16,24 or 32. Default depends on
294 maxclk:X maximum dotclock. X can be specified in MHz, kHz or Hz. Default is
297 in kHz or Hz. Default is `don't care`.
298 fv:X maximum vertical frequency. X must be specified in Hz. Default is