Lines Matching refs:then
88 Note: if cec_register_adapter() fails, then call cec_delete_adapter() to
89 clean up. But if cec_register_adapter() succeeded, then only call
136 capability is not set, then the physical address can change while the CEC
149 If enabled, then the adapter should be put in a mode to also monitor messages
161 If enabled, then the adapter should be put in a mode to also monitor CEC pin
173 If logical_addr == CEC_LOG_ADDR_INVALID then all programmed logical addresses
175 If the maximum number of available logical addresses is exceeded, then it
186 If configured == true, then the adapter is fully configured, i.e. all logical
187 addresses have been successfully claimed. If configured == false, then the
189 (un)configuration, then that can be done through this optional callback.
267 retrying messages. If set, then the framework assumes that it
277 to 1, if the hardware does support retry then either set these counters to
312 If the CEC adapter supports Error Injection functionality, then that can
329 If both callbacks are set, then an ``error-inj`` file will appear in debugfs.
333 line was reached, then the whole line is ignored. Otherwise a command is expected.
395 If the driver wants to process a CEC message, then it can implement this
396 callback. If it doesn't want to handle this message, then it should return
410 Transmit a CEC message. If block is true, then wait until the message has been
418 the physical address has become valid, then the CEC framework will start
419 claiming the logical addresses. If block is true, then this function won't
424 then the CEC adapter will be disabled. If you change a valid physical address
425 to another valid physical address, then this function will first set the
441 is set. If block is true, then wait until the logical addresses have been
446 invalid. Once the physical address becomes valid, then the framework will