Lines Matching full:hub
1 Microchip USB 2.0 Hi-Speed Hub Controller
14 - reset-gpios : Should specify the gpio for hub reset
16 - skip-config : Skip Hub configuration, but only send the USB-Attach command
17 - vendor-id : Set USB Vendor ID of the hub (16 bit, default is 0x0424)
18 - product-id : Set USB Product ID of the hub (16 bit, default depends on type)
19 - device-id : Set USB Device ID of the hub (16 bit, default is 0x0bb3)
39 - compound-device : indicate the hub is part of a compound device (boolean)
49 - sp-max-total-current-microamp: Specifies max current consumed by the hub
50 from VBUS when operating in self-powered hub. It includes the hub
53 - bp-max-total-current-microamp: Specifies max current consumed by the hub
54 from VBUS when operating in self-powered hub. It includes the hub
57 - sp-max-removable-current-microamp: Specifies max current consumed by the hub
58 from VBUS when operating in self-powered hub. It includes the hub
61 - bp-max-removable-current-microamp: Specifies max current consumed by the hub
62 from VBUS when operating in self-powered hub. It includes the hub