Lines Matching +full:thermal +full:- +full:calibration
1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/thermal/qcom-spmi-adc-tm-hc.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Qualcomm's SPMI PMIC ADC HC Thermal Monitoring
9 - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
13 const: qcom,spmi-adc-tm-hc
21 "#thermal-sensor-cells":
24 Number of cells required to uniquely identify the thermal sensors. Since
27 "#address-cells":
30 "#size-cells":
33 qcom,avg-samples:
37 - 1
38 - 2
39 - 4
40 - 8
41 - 16
49 - 256
50 - 512
51 - 1024
55 "^([-a-z0-9]*)@[0-7]$":
58 Represent one thermal sensor.
66 io-channels:
68 From common IIO binding. Used to pipe PMIC ADC channel to thermal monitor
73 Channel calibration type.
75 (1.875V) and GND for channel calibration. If property is not found,
77 also known as absolute calibration.
79 qcom,hw-settle-time-us:
83 qcom,pre-scaling:
84 $ref: /schemas/types.yaml#/definitions/uint32-array
87 pre-determined ratio and use it for post scaling. It is a pair of
93 - const: 1
94 - enum: [ 1, 3, 4, 6, 20, 8, 10 ]
97 - reg
98 - io-channels
104 - compatible
105 - reg
106 - interrupts
107 - "#address-cells"
108 - "#size-cells"
109 - "#thermal-sensor-cells"
114 - |
115 #include <dt-bindings/iio/qcom,spmi-vadc.h>
116 #include <dt-bindings/interrupt-controller/irq.h>
118 #address-cells = <1>;
119 #size-cells = <0>;
122 compatible = "qcom,spmi-adc-rev2";
123 #address-cells = <1>;
124 #size-cells = <0>;
125 #io-channel-cells = <1>;
128 adc-chan@4c {
133 pm8998_adc_tm: adc-tm@3400 {
134 compatible = "qcom,spmi-adc-tm-hc";
137 #thermal-sensor-cells = <1>;
138 #address-cells = <1>;
139 #size-cells = <0>;
143 io-channels = <&pm8998_adc ADC5_XO_THERM_100K_PU>;
145 qcom,hw-settle-time-us = <200>;