Lines Matching +full:rx +full:- +full:sample +full:- +full:delay +full:- +full:ns

1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/spi/spi-peripheral-props.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Peripheral-specific properties for a SPI bus.
11   be common properties like spi-max-frequency, spi-cpha, etc. or they could be
12   controller specific like delay in clock or data lines, etc. These properties
13   need to be defined in the peripheral node because they are per-peripheral and
19   - Mark Brown <broonie@kernel.org>
27         - minimum: 0
32   spi-cs-high:
37   spi-lsb-first:
42   spi-max-frequency:
47   spi-rx-bus-width:
50       If 0 is provided, then no RX will be possible on this device.
55   spi-rx-delay-us:
57       Delay, in microseconds, after a read transfer.
59   rx-sample-delay-ns:
60     description: SPI Rx sample delay offset, unit is nanoseconds.
61       The delay from the default sample time before the actual
62       sample of the rxd input signal occurs.
64   spi-tx-bus-width:
72   spi-tx-delay-us:
74       Delay, in microseconds, after a write transfer.
76   stacked-memories:
84     $ref: /schemas/types.yaml#/definitions/uint64-array
88   parallel-memories:
97     $ref: /schemas/types.yaml#/definitions/uint64-array
103   - $ref: cdns,qspi-nor-peripheral-props.yaml#
104   - $ref: samsung,spi-peripheral-props.yaml#
105   - $ref: nvidia,tegra210-quad-peripheral-props.yaml#