Lines Matching +full:bus +full:- +full:specific

1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/spi/spi-peripheral-props.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Peripheral-specific properties for a SPI bus.
11   be common properties like spi-max-frequency, spi-cpha, etc. or they could be
12   controller specific like delay in clock or data lines, etc. These properties
13   need to be defined in the peripheral node because they are per-peripheral and
15   properties are listed here. The controller specific properties should go in
19   - Mark Brown <broonie@kernel.org>
27         - minimum: 0
32   spi-cs-high:
37   spi-lsb-first:
42   spi-max-frequency:
47   spi-rx-bus-width:
49       Bus width to the SPI bus used for read transfers.
55   spi-rx-delay-us:
59   rx-sample-delay-ns:
64   spi-tx-bus-width:
66       Bus width to the SPI bus used for write transfers.
72   spi-tx-delay-us:
76   stacked-memories:
84     $ref: /schemas/types.yaml#/definitions/uint64-array
88   parallel-memories:
97     $ref: /schemas/types.yaml#/definitions/uint64-array
101 # The controller specific properties go here.
103   - $ref: cdns,qspi-nor-peripheral-props.yaml#
104   - $ref: samsung,spi-peripheral-props.yaml#
105   - $ref: nvidia,tegra210-quad-peripheral-props.yaml#