Lines Matching +full:clock +full:- +full:delay
7 - compatible : "realtek,rt5682" or "realtek,rt5682i"
9 - reg : The I2C address of the device.
13 - interrupts : The CODEC's interrupt output.
15 - realtek,dmic1-data-pin
20 - realtek,dmic1-clk-pin
21 0: using GPIO1 pin as dmic1 clock pin
22 1: using GPIO3 pin as dmic1 clock pin
24 - realtek,jd-src
28 - realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin.
30 - realtek,btndet-delay
31 The debounce delay for push button.
32 The delay time is realtek,btndet-delay value multiple of 8.192 ms.
35 - #clock-cells : Should be set to '<1>', wclk and bclk sources provided.
36 - clock-output-names : Name given for DAI clocks output.
38 - clocks : phandle and clock specifier for codec MCLK.
39 - clock-names : Clock name string for 'clocks' attribute, should be "mclk".
41 - realtek,dmic-clk-rate-hz : Set the clock rate (hz) for the requirement of
44 - realtek,dmic-delay-ms : Set the delay time (ms) for the requirement of
47 - realtek,dmic-clk-driving-high : Set the high driving of the DMIC clock out.
49 - #sound-dai-cells: Should be set to '<0>'.
64 interrupt-parent = <&gpio>;
66 realtek,ldo1-en-gpios =
68 realtek,dmic1-data-pin = <1>;
69 realtek,dmic1-clk-pin = <1>;
70 realtek,jd-src = <1>;
71 realtek,btndet-delay = <16>;
73 #clock-cells = <1>;
74 clock-output-names = "rt5682-dai-wclk", "rt5682-dai-bclk";
77 clock-names = "mclk";