Lines Matching +full:- +full:15 +full:v
5 - compatible : "cirrus,cs35l32"
7 - reg : the I2C address of the device for I2C. Address is determined by the level
10 - VA-supply, VP-supply : power supplies for the device,
15 - reset-gpios : a GPIO spec for the reset pin. If specified, it will be
18 - cirrus,boost-manager : Boost voltage control.
19 0 = Automatically managed. Boost-converter output voltage is the higher
21 1 = Automatically managed irrespective of audio, adapting for low-power
22 dissipation when LEDs are ON, and operating in Fixed-Boost Bypass Mode
25 3 = Boost voltage fixed at 5 V.
27 - cirrus,sdout-datacfg : Data configuration for dual CS35L32 applications only.
28 Determines the data packed in a two-CS35L32 configuration.
31 2 = (Default) left/right channels VMON[15:0], IMON [15:0].
34 - cirrus,sdout-share : SDOUT sharing. Determines whether one or two CS35L32
39 - cirrus,battery-recovery : Low battery nominal recovery threshold, rising VP.
40 0 = 3.1V
41 1 = 3.2V
42 2 = 3.3V (Default)
43 3 = 3.4V
45 - cirrus,battery-threshold : Low battery nominal threshold, falling VP.
46 0 = 3.1V
47 1 = 3.2V
48 2 = 3.3V
49 3 = 3.4V (Default)
50 4 = 3.5V
51 5 = 3.6V
58 reset-gpios = <&gpio 10 0>;
59 cirrus,boost-manager = <0x03>;
60 cirrus,sdout-datacfg = <0x02>;
61 VA-supply = <®_audio>;