Lines Matching full:must
9 Definition: must be one of:
22 Definition: must specify the base address and size of the qdsp6 and
28 Definition: must be "q6dsp" and "rmb"
45 must be "wdog", "fatal", "ready", "handover", "stop-ack"
49 must be "wdog", "fatal", "ready", "handover", "stop-ack",
55 Definition: must list the relative firmware image paths for mba and
71 must be "xo", "gcc_abhs_cbcr", "gcc_abhs_cbcr",
78 must be "iface", "bus", "mem", "xo"
80 must be "iface", "bus", "mem", "xo", "gpll0_mss",
83 must be "iface", "bus", "mem", "xo", "gpll0_mss",
86 must be "iface", "bus", "mem", "xo", "gpll0_mss",
101 Definition: must be "mss_restart" for the modem sub-system
102 must be "wcss_aon_reset", "wcss_reset", "wcss_q6_reset"
104 must be "mss_restart", "pdc_reset" for the modem
169 must be "cx", "mx"
171 must be "cx", "mx", "mss"
187 Definition: must be "stop"
196 The Hexagon node must contain iommus property as described in ../iommu/iommu.txt
200 The Hexagon node must contain two subnodes, named "mba" and "mpss" representing
201 the memory regions used by the Hexagon firmware. Each sub-node must contain: