Lines Matching +full:omit +full:- +full:battery +full:- +full:class
1 # SPDX-License-Identifier: GPL-2.0
4 ---
6 $schema: http://devicetree.org/meta-schemas/core.yaml#
8 title: Binding for TI BQ2419x Li-Ion Battery Charger
11 - Sebastian Reichel <sre@kernel.org>
14 - $ref: power-supply.yaml#
19 - ti,bq24190
20 - ti,bq24192
21 - ti,bq24192i
22 - ti,bq24196
30 usb-otg-vbus:
36 ti,system-minimum-microvolt:
38 when power is connected and the battery is below minimum system voltage,
41 omit-battery-class:
45 battery device.
47 monitored-battery:
50 phandle to a "simple-battery" compatible node.
53 in battery.yaml, with the following properties being required:
54 - precharge-current-microamp: maximum charge current during precharge phase
55 (typically 20% of battery capacity).
56 - charge-term-current-microamp: a charge cycle terminates when the battery voltage is
58 setting (typically 10% of battery capacity).
61 - compatible
62 - reg
63 - interrupts
68 - |
69 #include <dt-bindings/gpio/gpio.h>
70 #include <dt-bindings/interrupt-controller/irq.h>
72 bat: battery {
73 compatible = "simple-battery";
74 precharge-current-microamp = <256000>;
75 charge-term-current-microamp = <128000>;
79 #address-cells = <1>;
80 #size-cells = <0>;
85 interrupt-parent = <&gpiochip>;
87 monitored-battery = <&bat>;
88 ti,system-minimum-microvolt = <3200000>;
90 usb_otg_vbus: usb-otg-vbus { };