Lines Matching +full:pinctrl +full:- +full:pin +full:- +full:array

4 - compatible: "stericsson,db8500-pinctrl", "stericsson,db8540-pinctrl",
5               "stericsson,stn8815-pinctrl"
6 - nomadik-gpio-chips: array of phandles to the corresponding GPIO chips
7               (these have the register ranges used by the pin controller).
8 - prcm: phandle to the PRCMU managing the back end of this pin controller
10 Please refer to pinctrl-bindings.txt in this directory for details of the
11 common pinctrl bindings used by client devices, including the meaning of the
12 phrase "pin configuration node".
14 ST Ericsson's pin configuration nodes act as a container for an arbitrary number of
16 pin, a group, or a list of pins or groups. This configuration can include the
17 mux function to select on those pin(s)/group(s), and various pin configuration
22 pin multiplexing node layout from the standard pin control bindings
23 (see pinctrl-bindings.txt):
25 Required pin multiplexing subnode properties:
26 - function: A string containing the name of the function to mux to the
27   pin or group.
28 - groups : An array of strings. Each string contains the name of a pin
30   set-up.
32 Required pin configuration subnode properties:
33 - pins: A string array describing the pins affected by the configuration
35 - ste,config: Handle of pin configuration node
38 - ste,input : <0/1/2>
43 - ste,output: <0/1/2>
48 - ste,sleep: <0/1>
52 - ste,sleep-input: <0/1/2/3>
58 - ste,sleep-output: <0/1/2>
63 - ste,sleep-gpio: <0/1>
67 - ste,sleep-wakeup: <0/1>
68 	0: wake-up detection enabled,
69 	1: wake-up detection disabled.
71 - ste,sleep-pull-disable: <0/1>
72 	0: GPIO pull-up or pull-down resistor is enabled, when pin is an input,
73 	1: GPIO pull-up and pull-down resistor are disabled.
77 	pinctrl@80157000 {
78 		compatible = "stericsson,db8500-pinctrl";
79 		nomadik-gpio-chips = <&gpio0>, <&gpio1>, <&gpio2>, <&gpio3>;
82 		pinctrl-names = "default";
86 			ste,sleep-input = <3>;
87 			ste,sleep-wakeup = <1>;
88 			ste,sleep-pull-disable = <0>;
93 			ste,sleep-output = <1>;
94 			ste,sleep-wakeup = <1>;
95 			ste,sleep-pull-disable = <0>;
100 			ste,sleep-output = <2>;
101 			ste,sleep-wakeup = <1>;
102 			ste,sleep-pull-disable = <0>;
145 		pinctrl-names = "default","sleep";
146 		pinctrl-0 = <&uart0_default_mux>, <&uart0_default_mode>;
147 		pinctrl-1 = <&uart0_sleep_mode>;