Lines Matching +full:0 +full:x80120000

38 - ste,input : <0/1/2>
39 	0: input with no pull
43 - ste,output: <0/1/2>
44 	0: output low,
48 - ste,sleep: <0/1>
49 	0: sleep mode disable,
52 - ste,sleep-input: <0/1/2/3>
53 	0: sleep input with no pull,
58 - ste,sleep-output: <0/1/2>
59 	0: sleep output low,
63 - ste,sleep-gpio: <0/1>
64 	0: disable sleep gpio mode,
67 - ste,sleep-wakeup: <0/1>
68 	0: wake-up detection enabled,
71 - ste,sleep-pull-disable: <0/1>
72 	0: GPIO pull-up or pull-down resistor is enabled, when pin is an input,
88 			ste,sleep-pull-disable = <0>;
95 			ste,sleep-pull-disable = <0>;
102 			ste,sleep-pull-disable = <0>;
142 		reg = <0x80120000 0x1000>;
143 		interrupts = <0 11 0x4>;
146 		pinctrl-0 = <&uart0_default_mux>, <&uart0_default_mode>;