Lines Matching +full:gpio +full:- +full:reserved +full:- +full:ranges

6 - compatible:
9 	Definition: must be "qcom,msm8998-pinctrl"
11 - reg:
13 	Value type: <prop-encoded-array>
16 - interrupts:
18 	Value type: <prop-encoded-array>
21 - interrupt-controller:
26 - #interrupt-cells:
30 		    in <dt-bindings/interrupt-controller/irq.h>
32 - gpio-controller:
35 	Definition: identifies this node as a gpio controller
37 - #gpio-cells:
41 		    in <dt-bindings/gpio/gpio.h>
43 - gpio-ranges:
45 	Definition:  see ../gpio/gpio.txt
47 - gpio-reserved-ranges:
49 	Definition: see ../gpio/gpio.txt
51 Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
52 a general description of GPIO and interrupt bindings.
54 Please refer to pinctrl-bindings.txt in this directory for details of the
62 parameters, such as pull-up, drive strength, etc.
77 The following generic properties as defined in pinctrl-bindings.txt are valid
80 - pins:
82 	Value type: <string-array>
83 	Definition: List of gpio pins affected by the properties specified in
87 		      gpio0-gpio149
88 		        Supports mux, bias and drive-strength
91 		        Supports bias and drive-strength
94 		        Supports bias and drive-strength
96 - function:
100 		    specified pins. Functions are only valid for gpio pins.
103 		    gpio, adsp_ext, agera_pll, atest_char, atest_gpsadc0,
142 - bias-disable:
147 - bias-pull-down:
152 - bias-pull-up:
157 - output-high:
164 - output-low:
171 - drive-strength:
180 		compatible = "qcom,msm8998-pinctrl";
183 		gpio-controller;
184 		#gpio-cells = <2>;
185 		gpio-ranges = <&tlmm 0 0 175>;
186 		gpio-reserved-ranges = <0 4>, <81 4>;
187 		interrupt-controller;
188 		#interrupt-cells = <2>;
198 				drive-strength = <2>;
199 				bias-disable;