Lines Matching full:description
12 description:
23 description: disable any pin bias
27 description: high impedance mode ("third-state", "floating")
31 description: latch weakly
37 description: pull up the pin. Takes as optional argument on hardware
44 description: pull down the pin. Takes as optional argument on hardware
51 description: use pin-default pull state. Takes as optional argument on
60 description: drive actively high and low
68 description: drive with open drain
72 description: drive with open source
76 description: sink or source at most X mA
79 description: sink or source at most X uA
83 description: enable input on pin (no effect on output, such as
88 description: disable input on pin (no effect on output, such as
93 description: enable schmitt-trigger mode
97 description: disable schmitt-trigger mode
101 description: Takes the debounce time in usec as argument or 0 to disable
106 description: select between different power supplies
110 description: enable low power mode
114 description: disable low power mode
118 description: disable output on a pin (such as disable an output buffer)
122 description: enable output on a pin without actively driving it
126 description: set the output impedance of a pin to at most X ohms
130 description: set the pin to output mode with low level
134 description: set the pin to output mode with high level
138 description: indicate this is sleep related state which will be
143 description: set the slew rate
147 description: