Lines Matching +full:pinctrl +full:- +full:pin +full:- +full:array

4 - compatible: "lantiq,pinctrl-falcon"
5 - reg: Should contain the physical address and length of the gpio/pinmux
8 Please refer to pinctrl-bindings.txt in this directory for details of the
9 common pinctrl bindings used by client devices, including the meaning of the
10 phrase "pin configuration node".
12 Lantiq's pin configuration nodes act as a container for an arbitrary number of
14 pin, a group, or a list of pins or groups. This configuration can include the
15 mux function to select on those group(s), and two pin configuration parameters:
16 pull-up and open-drain
22 other words, a subnode that lists a mux function but no pin configuration
23 parameters implies no information about any pin configuration parameters.
24 Similarly, a pin subnode that describes a pullup parameter implies no
31 Required subnode-properties:
32 - lantiq,groups : An array of strings. Each string contains the name of a group.
34 - lantiq,function: A string containing the name of the function to mux to the
47 Definition of pin configurations:
49 Required subnode-properties:
50 - lantiq,pins : An array of strings. Each string contains the name of a pin.
53 Optional subnode-properties:
54 - lantiq,pull: Integer, representing the pull-down/up to apply to the pin.
56 - lantiq,drive-current: Boolean, enables drive-current
57 - lantiq,slew-rate: Boolean, enables slew-rate
61 		compatible = "lantiq,pinctrl-falcon";
62 		pinctrl-names = "default";
63 		pinctrl-0 = <&state_default>;