Lines Matching +full:led +full:- +full:open +full:- +full:drain

4 - compatible: "lantiq,pinctrl-falcon"
5 - reg: Should contain the physical address and length of the gpio/pinmux
8 Please refer to pinctrl-bindings.txt in this directory for details of the
16 pull-up and open-drain
31 Required subnode-properties:
32 - lantiq,groups : An array of strings. Each string contains the name of a group.
34 - lantiq,function: A string containing the name of the function to mux to the
44     rst, ntr, mdio, led, asc, spi, i2c, jtag, slic, pcm
49 Required subnode-properties:
50 - lantiq,pins : An array of strings. Each string contains the name of a pin.
53 Optional subnode-properties:
54 - lantiq,pull: Integer, representing the pull-down/up to apply to the pin.
56 - lantiq,drive-current: Boolean, enables drive-current
57 - lantiq,slew-rate: Boolean, enables slew-rate
61 		compatible = "lantiq,pinctrl-falcon";
62 		pinctrl-names = "default";
63 		pinctrl-0 = <&state_default>;