Lines Matching +full:irq +full:- +full:push +full:- +full:pull

1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10   - Patrick Rudolph <patrick.rudolph@9elements.com>
14   Pin function configuration is performed on a per-pin basis.
19       - cypress,cy8c9520
20       - cypress,cy8c9540
21       - cypress,cy8c9560
26   gpio-controller: true
28   '#gpio-cells':
31       flags, as defined in <dt-bindings/gpio/gpio.h>.
37   interrupt-controller: true
39   '#interrupt-cells':
42   gpio-line-names: true
44   gpio-ranges:
47   gpio-reserved-ranges:
50   vdd-supply:
55   '-pins$':
60     $ref: pincfg-node.yaml#
68           pattern: '^gp([0-7][0-7])$'
78       bias-pull-down: true
80       bias-pull-up: true
82       bias-disable: true
84       output-high: true
86       output-low: true
88       drive-push-pull: true
90       drive-open-drain: true
92       drive-open-source: true
95       - pins
96       - function
101   - compatible
102   - reg
103   - interrupts
104   - interrupt-controller
105   - '#interrupt-cells'
106   - gpio-controller
107   - '#gpio-cells'
112   - $ref: "pinctrl.yaml#"
115   - |
116     #include <dt-bindings/interrupt-controller/arm-gic.h>
117     #include <dt-bindings/interrupt-controller/irq.h>
120       #address-cells = <1>;
121       #size-cells = <0>;
126         gpio-controller;
127         #gpio-cells = <2>;
128         #interrupt-cells = <2>;
130         interrupt-controller;
131         vdd-supply = <&p3v3>;
132         gpio-reserved-ranges = <5 1>;