Lines Matching full:internal
14 describing a port needs to have a valid phandle referencing the internal PHY
16 ID. To declare the internal mdio-bus configuration, declare an MDIO node in
17 the switch node and declare the phandle for the port, referencing the internal
18 PHY it is connected to. In this config, an internal mdio-bus is registered and
19 the MDIO master is used for communication. Mixed external and internal
63 description: Qca8k switch have an internal mdio to access switch port.
65 internal mdio access is used.
66 With the legacy mapping the reg corresponding to the internal
235 phy-mode = "internal";
242 phy-mode = "internal";
249 phy-mode = "internal";
256 phy-mode = "internal";
263 phy-mode = "internal";