Lines Matching +full:rx +full:- +full:internal +full:- +full:delay
1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 The SJA1105 SPI interface requires a CS-to-CLK time (t2 in UM10944.pdf) of at
16 - $ref: "dsa.yaml#"
17 - $ref: /schemas/spi/spi-peripheral-props.yaml#
20 - Vladimir Oltean <vladimir.oltean@nxp.com>
25 - nxp,sja1105e
26 - nxp,sja1105t
27 - nxp,sja1105p
28 - nxp,sja1105q
29 - nxp,sja1105r
30 - nxp,sja1105s
31 - nxp,sja1110a
32 - nxp,sja1110b
33 - nxp,sja1110c
34 - nxp,sja1110d
39 # Optional container node for the 2 internal MDIO buses of the SJA1110
40 # (one for the internal 100base-T1 PHYs and the other for the single
41 # 100base-TX PHY). The "reg" property does not have physical significance.
42 # The PHY addresses to port correspondence is as follows: for 100base-T1,
43 # port 5 has PHY 1, port 6 has PHY 2 etc, while for 100base-TX, port 1 has
49 '#address-cells':
51 '#size-cells':
55 "^mdio@[0-1]$":
62 - enum:
63 - nxp,sja1110-base-t1-mdio
64 - nxp,sja1110-base-tx-mdio
68 - enum:
69 - 0
70 - 1
73 - compatible
74 - reg
77 "^(ethernet-)?ports$":
79 "^(ethernet-)?port@[0-9]+$":
81 - if:
83 phy-mode:
86 - rgmii
87 - rgmii-rxid
88 - rgmii-txid
89 - rgmii-id
92 rx-internal-delay-ps:
93 $ref: "#/$defs/internal-delay-ps"
94 tx-internal-delay-ps:
95 $ref: "#/$defs/internal-delay-ps"
98 - compatible
99 - reg
102 internal-delay-ps:
104 Disable tunable delay lines using 0 ps, or enable them and select
115 - |
117 #address-cells = <1>;
118 #size-cells = <0>;
120 ethernet-switch@1 {
124 ethernet-ports {
125 #address-cells = <1>;
126 #size-cells = <0>;
129 phy-handle = <&rgmii_phy6>;
130 phy-mode = "rgmii-id";
131 rx-internal-delay-ps = <0>;
132 tx-internal-delay-ps = <0>;
137 phy-handle = <&rgmii_phy3>;
138 phy-mode = "rgmii-id";
139 rx-internal-delay-ps = <0>;
140 tx-internal-delay-ps = <0>;
145 phy-handle = <&rgmii_phy4>;
146 phy-mode = "rgmii-id";
147 rx-internal-delay-ps = <0>;
148 tx-internal-delay-ps = <0>;
153 phy-handle = <&rgmii_phy4>;
154 phy-mode = "rgmii-id";
155 rx-internal-delay-ps = <0>;
156 tx-internal-delay-ps = <0>;
162 phy-mode = "rgmii";
163 rx-internal-delay-ps = <0>;
164 tx-internal-delay-ps = <0>;
167 fixed-link {
169 full-duplex;