Lines Matching +full:imx93 +full:- +full:clock
1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/mmc/fsl-imx-esdhc.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Shawn Guo <shawnguo@kernel.org>
13 - $ref: "mmc-controller.yaml"
20 by mmc.txt and the properties used by the sdhci-esdhc-imx driver.
25 - enum:
26 - fsl,imx25-esdhc
27 - fsl,imx35-esdhc
28 - fsl,imx51-esdhc
29 - fsl,imx53-esdhc
30 - fsl,imx6q-usdhc
31 - fsl,imx6sl-usdhc
32 - fsl,imx6sll-usdhc
33 - fsl,imx6sx-usdhc
34 - fsl,imx6ull-usdhc
35 - fsl,imx7d-usdhc
36 - fsl,imx7ulp-usdhc
37 - fsl,imx8mm-usdhc
38 - fsl,imxrt1050-usdhc
39 - nxp,s32g2-usdhc
40 - items:
41 - enum:
42 - fsl,imx8mq-usdhc
43 - const: fsl,imx7d-usdhc
44 - items:
45 - enum:
46 - fsl,imx8mn-usdhc
47 - fsl,imx8mp-usdhc
48 - fsl,imx93-usdhc
49 - fsl,imx8ulp-usdhc
50 - const: fsl,imx8mm-usdhc
51 - items:
52 - enum:
53 - fsl,imx8qm-usdhc
54 - const: fsl,imx8qxp-usdhc
55 - items:
56 - enum:
57 - fsl,imx8dxl-usdhc
58 - fsl,imx8mm-usdhc
59 - fsl,imx8mn-usdhc
60 - fsl,imx8mp-usdhc
61 - fsl,imx8qm-usdhc
62 - fsl,imx8qxp-usdhc
63 - const: fsl,imx7d-usdhc
65 - items:
66 - enum:
67 - fsl,imx8mn-usdhc
68 - fsl,imx8mp-usdhc
69 - const: fsl,imx8mm-usdhc
70 - const: fsl,imx7d-usdhc
72 - items:
73 - enum:
74 - fsl,imx8qm-usdhc
75 - const: fsl,imx8qxp-usdhc
76 - const: fsl,imx7d-usdhc
85 fsl,wp-controller:
90 fsl,delay-line:
94 This is used to set the clock delay for DLL(Delay Line) on override mode
95 to select a proper data sampling window in case the clock quality is not good
100 voltage-ranges:
101 $ref: '/schemas/types.yaml#/definitions/uint32-matrix'
109 - description: value for minimum slot voltage
110 - description: value for maximum slot voltage
113 fsl,tuning-start-tap:
119 fsl,tuning-step:
129 fsl,strobe-dll-delay-target:
133 This delay target programming host controller loopback read clock, and this
134 property allows user to change the delay target for the strobe input read clock.
144 clock-names:
146 - const: ipg
147 - const: ahb
148 - const: per
150 power-domains:
153 pinctrl-names:
155 - minItems: 3
157 - const: default
158 - const: state_100mhz
159 - const: state_200mhz
160 - const: sleep
161 - minItems: 1
163 - const: default
164 - const: sleep
167 - compatible
168 - reg
169 - interrupts
174 - |
176 compatible = "fsl,imx51-esdhc";
179 fsl,wp-controller;
183 compatible = "fsl,imx51-esdhc";
186 cd-gpios = <&gpio1 6 0>; /* GPIO1_6 */
187 wp-gpios = <&gpio1 5 0>; /* GPIO1_5 */