Lines Matching +full:csi +full:- +full:2

4 - compatible: "ifm,o2d-csi"
5 - reg: specifies sensor chip select number and associated address range
6 - interrupts: external interrupt line number and interrupt sense mode
8 - gpios: three gpio-specifiers for "capture", "reset" and "master enable"
10 - ifm,csi-clk-handle: the phandle to a node in the DT describing the sensor
12 - ifm,csi-addr-bus-width: address bus width (valid values are 16, 24, 25)
13 - ifm,csi-data-bus-width: data bus width (valid values are 8 and 16)
14 - ifm,csi-wait-cycles: sensor bus wait cycles
17 - ifm,csi-byte-swap: if this property is present, the byte swapping on
22 	csi@3,0 {
23 		compatible = "ifm,o2d-csi";
25 		interrupts = <1 1 2>;		/* IRQ1, edge falling */
27 		ifm,csi-clk-handle = <&timer7>;
32 		ifm,csi-addr-bus-width = <24>;
33 		ifm,csi-data-bus-width = <8>;
34 		ifm,csi-wait-cycles = <0>;