Lines Matching full:leds
4 $id: http://devicetree.org/schemas/leds/leds-bcm6328.yaml#
7 title: LEDs connected to Broadcom BCM6328 controller
14 In these SoCs it's possible to control LEDs both as GPIOs or by hardware.
15 However, on some devices there are Serial LEDs (LEDs connected to a 74x164
20 Some of these Serial LEDs are hardware controlled (e.g. ethernet LEDs) and
21 exporting the 74x164 as spi-gpio prevents those LEDs to be hardware
28 registers you have some limited control over rerouting the LEDs (as
32 reason, hardware controlled LEDs aren't registered as LED class devices.
34 Each LED is represented as a sub-node of the brcm,bcm6328-leds device.
38 const: brcm,bcm6328-leds
43 brcm,serial-leds:
45 description: Enables Serial LEDs.
49 description: Enables Serial LEDs multiplexing.
61 description: Inverts Serial LEDs shift direction.
79 description: LED pin number (only LEDs 0 to 23 are valid).
95 signals can get muxed into these LEDs. Only valid for LEDs 0 to 7,
96 where LED signals 0 to 3 may be muxed to LEDs 0 to 3, and signals 4 to
97 7 may be muxed to LEDs 4 to 7. A signal can be muxed to more than one
106 hardware signals can get muxed into these LEDs. Only valid for LEDs 0
107 to 7, where LED signals 0 to 3 may be muxed to LEDs 0 to 3, and
108 signals 4 to 7 may be muxed to LEDs 4 to 7. A signal can be muxed to
125 /* BCM6328 with 4 EPHY LEDs */
127 compatible = "brcm,bcm6328-leds";
172 /* BCM63268 with Serial/GPHY0 LEDs */
174 compatible = "brcm,bcm6328-leds";
178 brcm,serial-leds;
269 compatible = "brcm,bcm6328-leds";
327 compatible = "brcm,bcm6328-leds";
355 /* BCM6362 with EPHY LEDs swapped */
357 compatible = "brcm,bcm6328-leds";