Lines Matching +full:wakeup +full:- +full:parent

5 -------------------------
8 "interrupts" property, an "interrupts-extended" property, or both. If both are
16 	interrupt-parent = <&intc1>;
19 The "interrupt-parent" property is used to specify the controller to which
22 interrupt client node or in any of its parent nodes. Interrupts listed in the
23 "interrupts" property are always in reference to the node's interrupt parent.
25 The "interrupts-extended" property is a special form; useful when a node needs
26 to reference multiple interrupt parents or a different interrupt parent than
27 the inherited one. Each entry in this property contains both the parent phandle
31 	interrupts-extended = <&intc1 5 1>, <&intc2 1 0>;
34 -----------------------------
36 A device is marked as an interrupt controller with the "interrupt-controller"
37 property. This is a empty, boolean property. An additional "#interrupt-cells"
45   -----------
46   The #interrupt-cells property is set to 1 and the single cell defines the
52 		compatible = "arm,versatile-vic";
53 		interrupt-controller;
54 		#interrupt-cells = <1>;
59 		compatible = "arm,versatile-sic";
60 		interrupt-controller;
61 		#interrupt-cells = <1>;
63 		interrupt-parent = <&vic>;
68   ------------
69   The #interrupt-cells property is set to 2 and the first cell defines the
72     - bits[3:0] trigger type and level flags
73         1 = low-to-high edge triggered
74         2 = high-to-low edge triggered
75         4 = active high level-sensitive
76         8 = active low level-sensitive
81 		gpioext: gpio-adnp@41 {
82 			compatible = "ad,gpio-adnp";
85 			interrupt-parent = <&gpio>;
88 			gpio-controller;
89 			#gpio-cells = <1>;
91 			interrupt-controller;
92 			#interrupt-cells = <2>;
94 			nr-gpios = <64>;
101 			interrupt-parent = <&gpioext>;
104 			#address-cells = <1>;
105 			#size-cells = <0>;
112 3) Interrupt wakeup parent
113 --------------------------
116 interrupts routed to them, so that they can wakeup the SoC from suspend. These
117 interrupt controllers do not fall into the category of a parent interrupt
118 controller and can be specified by the "wakeup-parent" property and contain a
119 single phandle referring to the wakeup capable interrupt controller.
122 	wakeup-parent = <&pdc_intc>;