Lines Matching +full:20 +full:a

56   "@([1-9]|1[0-9]|20)$":
62           The channel number. It can be connected to one of the 20 channels of
65         maximum: 20
78       Represents a thermocouple sensor which is connected to one of the device
110           Phandle which points to a sensor object responsible for measuring
116           This is a table, where each entry should be a pair of
132       Represents a diode sensor which is connected to one of the device
137         description: Identifies the sensor as a diode.
153           Boolean property which enables a running average of the diode
155           as a cold junction temperature element on an isothermal block
165         enum: [10, 20, 40, 80]
171           information look at table 20 of the datasheet.
177       Represents a rtd sensor which is connected to one of the device channels.
182         maximum: 20
201           Phandle pointing to a rsense object associated with this RTD.
240           This is a table, where each entry should be a pair of
260       Represents a thermistor sensor which is connected to one of the device
267           20 - Thermistor 44005/44030 3kohm at 25°C
281           Phandle pointing to a rsense object associated with this
314           This is a table, where each entry should be a pair of
344     description: Represents a channel which is being used as a direct adc.
348         description: Identifies the sensor as a direct adc.
359       Represents a rsense which is connected to one of the device channels.
365         maximum: 20
368         description: Identifies the sensor as a rsense.
374           Sets the value of the sense resistor. Look at table 20 of the
401                 interrupts = <20 IRQ_TYPE_EDGE_RISING>;
447                 thermocouple@20 {
448                         reg = <20>;