Lines Matching full:connected
20 When used in practice, a thermistor is often connected between ground, a
35 / | | "connected ground"
42 | | (pdo) | "connected positive"
49 called "connected ground" and "connected positive" and shall be understood as
52 If the pull-up resistance is 0 one end of the thermistor is connected to the
57 connected to ground and we get the thermistor under the pull-up resistor
61 the figure illustrates where the voltage will be measured for the "connected
62 ground" and "connected positive" cases.
110 connected-positive:
112 description: Indicates how the thermistor is connected in series with
115 to be connected-ground, which usually means a pull-down resistance of