Lines Matching +full:extended +full:- +full:range +full:- +full:enable
1 # SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Jean Delvare <jdelvare@suse.com>
11 - Guenter Roeck <linux@roeck-us.net>
16 - adi,adm1032
17 - adi,adt7461
18 - adi,adt7461a
19 - adi,adt7481
20 - dallas,max6646
21 - dallas,max6647
22 - dallas,max6649
23 - dallas,max6657
24 - dallas,max6658
25 - dallas,max6659
26 - dallas,max6680
27 - dallas,max6681
28 - dallas,max6695
29 - dallas,max6696
30 - gmt,g781
31 - national,lm86
32 - national,lm89
33 - national,lm90
34 - national,lm99
35 - nxp,sa56004
36 - onnn,nct1008
37 - ti,tmp451
38 - ti,tmp461
39 - winbond,w83l771
44 - description: |
45 Single interrupt specifier which describes the LM90 "-ALERT" pin
51 "#thermal-sensor-cells":
54 '#address-cells':
57 '#size-cells':
60 vcc-supply:
63 ti,extended-range-enable:
64 description: Set to enable extended range temperature.
68 - compatible
69 - reg
72 "^channel@([0-2])$":
78 description: The channel number. 0 is local channel, 1-2 are remote channels.
86 temperature-offset-millicelsius:
90 - reg
95 - if:
101 - adi,adt7461
102 - adi,adt7461a
103 - adi,adt7481
104 - ti,tmp451
105 - ti,tmp461
108 ti,extended-range-enable: false
110 - if:
115 - dallas,max6646
116 - dallas,max6647
117 - dallas,max6649
118 - dallas,max6657
119 - dallas,max6658
120 - dallas,max6659
121 - dallas,max6695
122 - dallas,max6696
125 "^channel@([0-2])$":
127 temperature-offset-millicelsius: false
129 - if:
134 - adi,adt7461
135 - adi,adt7461a
136 - adi,adt7481
137 - onnn,nct1008
140 "^channel@([0-2])$":
142 temperature-offset-millicelsius:
145 - if:
150 - adi,adm1032
151 - dallas,max6680
152 - dallas,max6681
153 - gmt,g781
154 - national,lm86
155 - national,lm89
156 - national,lm90
157 - national,lm99
158 - nxp,sa56004
159 - winbond,w83l771
162 "^channel@([0-2])$":
164 temperature-offset-millicelsius:
167 - if:
172 - ti,tmp451
173 - ti,tmp461
176 "^channel@([0-2])$":
178 temperature-offset-millicelsius:
184 - |
185 #include <dt-bindings/interrupt-controller/irq.h>
188 #address-cells = <1>;
189 #size-cells = <0>;
194 vcc-supply = <&palmas_ldo6_reg>;
196 #thermal-sensor-cells = <1>;
199 - |
201 #address-cells = <1>;
202 #size-cells = <0>;
207 #address-cells = <1>;
208 #size-cells = <0>;
218 temperature-offset-millicelsius = <4000>;
224 temperature-offset-millicelsius = <750>;