Lines Matching full:polarity
86 A gpio-specifier should contain a flag indicating the GPIO polarity; active-
90 The gpio-specifier's polarity flag should represent the physical level at the
97 When the device's signal polarity is configurable, the binding for the
100 a) Define a single static polarity for the signal, with the expectation that
102 that signal polarity.
104 The static choice of polarity may be either:
112 In particular, the polarity cannot be derived from the gpio-specifier, since
114 concepts of configurable signal polarity in the device, and possible board-
119 b) Pick a single option for device signal polarity, and document this choice
120 in the binding. The gpio-specifier should represent the polarity of the signal
122 particular signal polarity choice. If software chooses to program the device
123 to generate or receive a signal of the opposite polarity, software will be