Lines Matching +full:edge +full:- +full:low

9 GPIO controller only supports edge, not level, triggering of interrupts.
12 -------------------
14 - compatible: "brcm,bcm11351-gpio", "brcm,kona-gpio"
15 - reg: Physical base address and length of the controller's registers.
16 - interrupts: The interrupt outputs from the controller. There is one GPIO
21 - #gpio-cells: Should be <2>. The first cell is the pin number, the second
23   - bit 0 specifies polarity (0 for normal, 1 for inverted)
24   See also "gpio-specifier" in .../devicetree/bindings/gpio/gpio.txt.
25 - #interrupt-cells: Should be <2>. The first cell is the GPIO number. The
28   - trigger type (bits[1:0]):
29       1 = low-to-high edge triggered.
30       2 = high-to-low edge triggered.
31       3 = low-to-high or high-to-low edge triggered
33   See also .../devicetree/bindings/interrupt-controller/interrupts.txt.
34 - gpio-controller: Marks the device node as a GPIO controller.
35 - interrupt-controller: Marks the device node as an interrupt controller.
39 		compatible = "brcm,bcm11351-gpio", "brcm,kona-gpio";
48 		#gpio-cells = <2>;
49 		#interrupt-cells = <2>;
50 		gpio-controller;
51 		interrupt-controller;