Lines Matching full:programming

130  * image-specific information needed to to the programming.
147 one bridge to control during FPGA programming, the region will also contain a
181 	controlled during FPGA programming along with the parent FPGA bridge.
198 - child nodes : devices in the FPGA after programming.
202 programming: the parent fpga_bridge0 and fpga_bridge1.  Because the region is
204 fpga-bridges property.  During programming, these bridges are disabled, the
206 specified in the region.  If FPGA programming succeeds, the bridges are
208 are then populated.  If FPGA programming fails, the bridges are left disabled
324 to handle programming the FPGA.  If the FPGA Region is the child of another FPGA
327 FPGA programming, the FPGA Region will disable the bridges that are in its
328 "fpga-bridges" list and will re-enable them after FPGA programming has
440 programming is the FPGA based bridge of fpga_region1.
472 During programming, transactions through those connections must be stopped and