Lines Matching +full:lcd +full:- +full:supply
7 - compatible: should be "truly,nt35597-2K-display"
8 - vdda-supply: phandle of the regulator that provides the supply voltage
9 Power IC supply
10 - vdispp-supply: phandle of the regulator that provides the supply voltage
11 for positive LCD bias
12 - vdispn-supply: phandle of the regulator that provides the supply voltage
13 for negative LCD bias
14 - reset-gpios: phandle of gpio for reset line
15 This should be 8mA, gpio can be configured using mux, pinctrl, pinctrl-names
17 - mode-gpios: phandle of the gpio for choosing the mode of the display
20 - ports: This device has two video ports driven by two DSIs. Their connections
23 - port@0: DSI input port driven by master DSI
24 - port@1: DSI input port driven by secondary DSI
30 compatible = "truly,nt35597-2K-display";
32 vdda-supply = <&pm8998_l14>;
33 vdispp-supply = <&lab_regulator>;
34 vdispn-supply = <&ibb_regulator>;
35 pinctrl-names = "default", "suspend";
36 pinctrl-0 = <&dpu_dsi_active>;
37 pinctrl-1 = <&dpu_dsi_suspend>;
39 reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
40 mode-gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>;
42 #address-cells = <1>;
43 #size-cells = <0>;
47 remote-endpoint = <&dsi0_out>;
54 remote-endpoint = <&dsi1_out>;