Lines Matching +full:input +full:- +full:mode

1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10   - Jacopo Mondi <jacopo+renesas@jmondi.org>
11   - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
15   streams to parallel data outputs. The chip supports single/dual input/output
16   modes, handling up to two LVDS input streams and up to two digital CMOS/TTL
19   Single or dual operation mode, output data mapping and DDR output modes are
20   configured through input signals and the chip does not expose any control
30       The device can operate in single or dual input and output modes.
32       When operating in single input mode, all pixels are received on port@0,
33       and port@1 shall not contain any endpoint. In dual input mode,
34       even-numbered pixels are received on port@0 and odd-numbered pixels on
37       When operating in single output mode all pixels are output from the first
39       mode pixels are output from both CMOS/TTL ports and both port@2 and
45         description: First LVDS input port
49         description: Second LVDS input port
60       - port@0
61       - port@2
63   oe-gpios:
67   powerdown-gpios:
71   vcc-supply:
73       Power supply for the TTL output, TTL CLOCKOUT signal, LVDS input, PLL and
77   - compatible
78   - ports
79   - vcc-supply
84   - |
85     #include <dt-bindings/gpio/gpio.h>
87     lvds-decoder {
90         vcc-supply = <&reg_lvds_vcc>;
91         powerdown-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
94             #address-cells = <1>;
95             #size-cells = <0>;
101                     remote-endpoint = <&lvds_out>;
109                     remote-endpoint = <&adv7511_in>;