Lines Matching full:sink
74 - sink
83 - sink
131 sink-pdos:
132 description: An array of u32 with each entry providing supported power sink
135 Sink Capabilities Message, the order of each entry(PDO) should follow the
136 PD spec chapter 6.4.1. Required for power sink and power dual role. User
137 can specify the sink PDO array via PDO_FIXED/BATT/VAR/PPS_APDO() defined
143 sink-vdos:
155 sink-vdos-v1:
166 op-sink-microwatt:
167 description: Sink required operating power in microwatt, if source can't
168 offer the power, Capability Mismatch is set. Required for power sink and
197 is applied during PD3.0 Fast Role Swap. "Table 6-14 Fixed Supply PDO - Sink"
200 provides a detailed description of the field. The sink PDO from current source
202 requirement during fr swap. The current sink (i.e. receiver of the FRS signal),
204 new sink's, requirement during frswap before enabling the frs signal reception.
205 This property refers to maximum current capability that the current sink can
208 "1" refers to default USB power level as described by "Table 6-14 Fixed Supply PDO - Sink".
216 still comply to pSnkStby i.e Maximum power that can be consumed by sink while in Sink Standby
217 state as defined in 7.4.2 Sink Electrical Parameters of USB Power Delivery Specification
225 sink-vdos-v1: [ 'sink-vdos' ]
226 sink-vdos: [ 'sink-vdos-v1' ]
317 try-power-role = "sink";
319 sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)
321 op-sink-microwatt = <10000000>;