Lines Matching +full:wake +full:- +full:up
4 - compatible: Should be "atmel,sama5d2-chipid" or "microchip,sama7g5-chipid"
5 - reg : Should contain registers location and length
8 - compatible: Should be "atmel,at91sam9260-pit"
9 - reg: Should contain registers location and length
10 - interrupts: Should contain interrupt for the PIT which is the IRQ line
14 - compatible: Should be "microchip,sam9x60-pit64b"
15 - reg: Should contain registers location and length
16 - interrupts: Should contain interrupt for PIT64B timer
17 - clocks: Should contain the available clock sources for PIT64B timer.
20 - compatible: Should be "atmel,at91rm9200-st", "syscon", "simple-mfd"
21 - reg: Should contain registers location and length
22 - interrupts: Should contain interrupt for the ST which is the IRQ line
24 - clocks: phandle to input clock.
26 - watchdog: compatible should be "atmel,at91rm9200-wdt"
29 - compatible: Should be "atmel,at91rm9200-sdramc", "syscon"
30 "atmel,at91sam9260-sdramc",
31 "atmel,at91sam9g45-ddramc",
32 "atmel,sama5d3-ddramc",
33 "microchip,sam9x60-ddramc",
34 "microchip,sama7g5-uddrc"
35 - reg: Should contain registers location and length
40 compatible = "atmel,at91sam9g45-ddramc";
45 - compatible: Should be "microchip,sama7g5-ddr3phy", "syscon"
46 - reg: Should contain registers location and length
51 compatible = "microchip,sama7g5-ddr3phy", "syscon";
58 - compatible: Should be "atmel,<chip>-shdwc".
60 - reg: Should contain registers location and length
61 - clocks: phandle to input clock.
64 - atmel,wakeup-mode: String, operation mode of the wakeup mode.
66 - atmel,wakeup-counter: Counter on Wake-up 0 (between 0x0 and 0xf).
69 - atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
72 - atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up.
73 - atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
76 - atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up.
81 compatible = "atmel,at91sam9260-shdwc";
86 SHDWC SAMA5D2-Compatible Shutdown Controller
91 - compatible: should be "atmel,sama5d2-shdwc", "microchip,sam9x60-shdwc" or
92 "microchip,sama7g5-shdwc"
93 - reg: should contain registers location and length
94 - clocks: phandle to input clock.
95 - #address-cells: should be one. The cell is the wake-up input index.
96 - #size-cells: should be zero.
100 - debounce-delay-us: minimum wake-up inputs debouncer period in
101 microseconds. It's usually a board-related property.
102 - atmel,wakeup-rtc-timer: boolean to enable Real-Time Clock wake-up.
104 optional microchip,sam9x60-shdwc or microchip,sama7g5-shdwc properties:
105 - atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
107 The node contains child nodes for each wake-up input that the platform uses.
111 Wake-up input nodes are usually described in the "board" part of the Device
112 Tree. Note also that input 0 is linked to the wake-up pin and is frequently
116 - reg: should contain the wake-up input index [0 - 15].
119 - atmel,wakeup-active-high: boolean, the corresponding wake-up input described
120 by the child, forces the wake-up of the core power supply on a high level.
127 compatible = "atmel,sama5d2-shdwc";
130 #address-cells = <1>;
131 #size-cells = <0>;
132 atmel,wakeup-rtc-timer;
137 debounce-delay-us = <976>;
145 atmel,wakeup-active-high;
156 - compatible: Should be "atmel,<chip>-sfr", "syscon" or
157 "atmel,<chip>-sfrbu", "syscon"
159 It also can be "microchip,sam9x60-sfr", "syscon".
160 - reg: Should contain registers location and length
163 compatible = "atmel,sama5d3-sfr", "syscon";
174 Note that they maintain their voltage during Backup/Self-refresh.
177 - compatible: Should be "atmel,<chip>-secumod", "syscon".
179 - reg: Should contain registers location and length
180 - gpio-controller: Marks the port as GPIO controller.
181 - #gpio-cells: There are 2. The pin number is the
187 compatible = "atmel,sama5d2-secumod", "syscon";
189 gpio-controller;
190 #gpio-cells = <2>;