Lines Matching full:bayer

22 The CIO2 device receives the raw Bayer data from the sensors and outputs the
71 Capturing frames in raw Bayer format
74 CIO2 MIPI CSI2 receiver is used to capture frames (in packed raw Bayer format)
83 raw Bayer format that is specific to IPU3.
91 frames in packed raw Bayer format to IPU3 CSI2 receiver.
185 <entity>:<pad-number> format) is queued with buffer (in packed raw Bayer
199 The frames (in packed raw Bayer format specific to the IPU3) received by the
204 Details onand the Bayer format specific to the IPU3 can be found in
245 output larger bayer frame for further YUV processing than "VIDEO" mode to get
264 Processing the image in raw Bayer format
292 cropping or scaling, these hardware blocks include Input Feeder(IF), Bayer Down
297 RAW Bayer frames go through these ImgU pipeline hardware blocks and the final
307 Input Feeder gets the Bayer frame data from the sensor, it can enable cropping
311 **Bayer Down Scaler**
313 Bayer Down Scaler is capable of performing image scaling in Bayer domain, the
332 For a given supported resolution for an input frame, the Input Feeder, Bayer
368 Once this is done, the received raw Bayer frames can be input to the ImgU
373 v4l2n command can be used. This helps process the raw Bayer frames and produces
407 Converting the raw Bayer image into YUV domain
458        b [label="Bayer Downscaling"]
463        g [label="Bayer Noise Reduction"]
504 BNR			 Bayer noise reduction block removes image noise by
508 			 that performs noise reduction in the Bayer domain. The
511 DM			 Demosaicing converts raw sensor data in Bayer format
561 		Bayer downscaler parameters