Lines Matching refs:RO
6 (RO) The major and minor revision of the firmware.
14 (RO) Holds additional information about the firmware revision,
25 (RO) Device revision. Useful for identifying if significant
35 (RO) Indicates whether device provides device sensor data
44 (RO) Device id is specified by the manufacturer identified by
55 (RO) Lists the IPMI ‘logical device’ commands and functions
65 (RO) Displays the IPMI Command Specification Version.
73 (RO) Identifies the manufacturer responsible for the
83 (RO) Displays a number that identifies a particular system,
96 (RO) A GUID (Globally Unique ID), also referred to as a UUID
107 (RO) The device interface for IPMI "kcs", "smic", "bt" or
127 idles (RO) Number of times the interface was
130 watchdog_pretimeouts (RO) Number of watchdog pretimeouts.
132 complete_transactions (RO) Number of completed messages.
134 events (RO) Number of IPMI events received from
137 interrupts (RO) Number of interrupts the driver
140 hosed_count (RO) Number of times the hardware didn't
143 long_timeouts (RO) Number of times the driver
147 flag_fetches (RO) Number of times the driver
150 attentions (RO) Number of time the driver got an
153 incoming_messages (RO) Number of asynchronous messages
156 short_timeouts (RO) Number of times the driver
167 (RO) Indicates whether interrupts are enabled or not. The driver
186 (RO) Shows the IMPI device interface type - "ssif" here.
207 hosed (RO) Number of times the hardware didn't
210 alerts (RO) Number of alerts received.
212 sent_messages (RO) Number of total messages sent.
214 sent_message_parts (RO) Number of message parts sent.
218 received_messages (RO) Number of message responses
221 received_message_parts (RO) Number of message fragments
224 events (RO) Number of received events.
226 watchdog_pretimeouts (RO) Number of watchdog pretimeouts.
228 flag_fetches (RO) Number of times a flag fetch was
231 send_retries (RO) Number of time a message was
234 receive_retries (RO) Number of times the receive of a
237 send_errors (RO) Number of times the send of a
240 receive_errors (RO) Number of errors in receiving