Lines Matching +full:output +full:- +full:charge +full:- +full:current
14 Current temperature as reported by thermal zone (sensor).
32 charge of the thermal management.
61 E.g. it can be one of critical, hot, passive, `active[0-*]`
84 The trip point in this thermal zone which `cdev[0-*]` is
85 associated with; -1 means the cooling device is not
92 The influence of `cdev[0-*]` in this thermal zone. This value
124 Documentation/driver-api/thermal/power_allocator.rst
133 Documentation/driver-api/thermal/power_allocator.rst
141 is when the current temperature is above the "desired
143 Documentation/driver-api/thermal/power_allocator.rst
151 is when the current temperature is below the "desired
153 Documentation/driver-api/thermal/power_allocator.rst
165 Documentation/driver-api/thermal/power_allocator.rst
194 Documentation/driver-api/thermal/power_allocator.rst
204 - for generic ACPI: should be "Fan", "Processor" or "LCD"
205 - for memory controller device on intel_menlow platform:
218 The current cooling state of this cooling device.
221 - cur_state == 0 means no cooling
222 - cur_state == max_state means the maximum cooling.
235 cooling states. The output will have "<state> <time>" pair
239 Output will have one line for each of the supported states.
253 transitions. The cat output here is a two dimensional matrix,
257 an -EFBIG error.