Lines Matching +full:- +full:temperature

14 		Current temperature as reported by thermal zone (sensor).
51 		The temperature above which trip point will be fired.
61 		E.g. it can be one of critical, hot, passive, `active[0-*]`
84 		The trip point in this thermal zone which `cdev[0-*]` is
85 		associated with; -1 means the cooling device is not
92 		The influence of `cdev[0-*]` in this thermal zone. This value
102 		Interface to set the emulated temperature method in thermal zone
103 		(sensor). After setting this temperature, the thermal zone may
104 		pass this temperature to platform emulation function if
106 		different temperature threshold and its associated cooling
117 		    flooding this sysfs node with low temperature values.
124 		Documentation/driver-api/thermal/power_allocator.rst
133 		Documentation/driver-api/thermal/power_allocator.rst
140 		controller during temperature overshoot. Temperature overshoot
141 		is when the current temperature is above the "desired
142 		temperature" trip point. For more information see
143 		Documentation/driver-api/thermal/power_allocator.rst
150 		controller during temperature undershoot. Temperature undershoot
151 		is when the current temperature is below the "desired
152 		temperature" trip point. For more information see
153 		Documentation/driver-api/thermal/power_allocator.rst
159 		Temperature offset from the desired temperature trip point
163 		accumulates error when temperature is above the desired
164 		temperature trip point. For more information see
165 		Documentation/driver-api/thermal/power_allocator.rst
174 		to determine a hotspot temperature based off the sensor's
183 		to determine a hotspot temperature based off the sensor's
194 		Documentation/driver-api/thermal/power_allocator.rst
204 		- for generic ACPI: should be "Fan", "Processor" or "LCD"
205 		- for memory controller device on intel_menlow platform:
221 		- cur_state == 0 means no cooling
222 		- cur_state == max_state means the maximum cooling.
257 		an -EFBIG error.