Lines Matching +full:bat +full:- +full:present
5 Contact: linux-pm@vger.kernel.org
14 Contact: linux-pm@vger.kernel.org
23 Contact: linux-pm@vger.kernel.org
32 Contact: linux-pm@vger.kernel.org
43 Contact: linux-pm@vger.kernel.org
66 Contact: linux-pm@vger.kernel.org
81 Contact: linux-pm@vger.kernel.org
94 read-only reporting, unless the 'online' state of the supply
106 Contact: linux-pm@vger.kernel.org
124 Contact: linux-pm@vger.kernel.org
128 Maximum TBAT temperature trip-wire value where the supply will
129 notify user-space of the event.
133 Maximum supply temperature trip-wire value where the supply
134 will notify user-space of the event.
137 user-space needs to know if the temperature has crossed an
148 Contact: linux-pm@vger.kernel.org
153 Minimum TBAT temperature trip-wire value where the supply will
154 notify user-space of the event.
158 Minimum supply temperature trip-wire value where the supply
159 will notify user-space of the event.
161 This is normally used for the charging scenario where user-space
173 Contact: linux-pm@vger.kernel.org
190 Contact: linux-pm@vger.kernel.org
207 Contact: linux-pm@vger.kernel.org
224 Contact: linux-pm@vger.kernel.org
241 Contact: linux-pm@vger.kernel.org
253 read-only reporting, unless the 'online' state of the supply
265 Contact: linux-pm@vger.kernel.org
271 Valid values: 0 - 100 (percent)
275 Contact: linux-pm@vger.kernel.org
277 Maximum battery capacity trip-wire value where the supply will
278 notify user-space of the event. This is normally used for the
279 battery discharging scenario where user-space needs to know the
286 Valid values: 0 - 100 (percent)
290 Contact: linux-pm@vger.kernel.org
292 Minimum battery capacity trip-wire value where the supply will
293 notify user-space of the event. This is normally used for the
294 battery discharging scenario where user-space needs to know the
301 Valid values: 0 - 100 (percent)
305 Contact: linux-pm@vger.kernel.org
310 Values close to 0% will be returned after (re-)calibration
317 Valid values: 0 - 100 (percent)
321 Contact: linux-pm@vger.kernel.org
333 Contact: linux-pm@vger.kernel.org
344 Contact: linux-pm@vger.kernel.org
354 Contact: linux-pm@vger.kernel.org
360 Valid values: 0 - 100 (percent)
364 Contact: linux-pm@vger.kernel.org
374 Valid values: 0 - 100 (percent)
378 Contact: linux-pm@vger.kernel.org
400 Contact: linux-pm@vger.kernel.org
411 Contact: linux-pm@vger.kernel.org
427 Contact: linux-pm@vger.kernel.org
429 Reports the charging current applied during pre-charging phase
436 What: /sys/class/power_supply/<supply_name>/present
438 Contact: linux-pm@vger.kernel.org
440 Reports whether a battery is present or not in the system.
448 1: Present
453 Contact: linux-pm@vger.kernel.org
456 is read-only reporting although for some supplies this can be
467 Contact: linux-pm@vger.kernel.org
476 inhibit-charge: Do not charge while AC is attached
477 force-discharge: Force discharge while AC is attached
482 Contact: linux-pm@vger.kernel.org
489 "Unknown", "NiMH", "Li-ion", "Li-poly", "LiFe",
495 Contact: linux-pm@vger.kernel.org
507 Contact: linux-pm@vger.kernel.org
522 Contact: linux-pm@vger.kernel.org
537 Contact: linux-pm@vger.kernel.org
541 system-level knowledge or user input (e.g. This is part of the
555 Contact: linux-pm@vger.kernel.org
559 system-level knowledge or user input. Use preferably this
569 Contact: linux-pm@vger.kernel.org
571 Indicates if VBUS is present for the supply. When the supply is
573 between online states (e.g. Fixed -> Programmable for a PD_PPS
582 1: Online Fixed - Fixed Voltage Supply
583 2: Online Programmable - Programmable Voltage Supply
588 Contact: linux-pm@vger.kernel.org
591 the supply, for example it can show if USB-PD capable source
594 Access: Read-Only
602 What: /sys/class/power/ds2760-battery.*/charge_now
614 What: /sys/class/power/ds2760-battery.*/charge_full
623 What: /sys/class/power_supply/max14577-charger/device/fast_charge_timer
629 charger operates in fast-charge mode. When the timer expires
630 the device will terminate fast-charge mode (charging current
635 - 5, 6 or 7 (hours),
636 - 0: disabled.
638 What: /sys/class/power_supply/max77693-charger/device/fast_charge_timer
644 charger operates in fast-charge mode. When the timer expires
645 the device will terminate fast-charge mode (charging current
650 - 4 - 16 (hours), step by 2 (rounded down)
651 - 0: disabled.
653 What: /sys/class/power_supply/max77693-charger/device/top_off_threshold_current
659 entering top-off charging mode. When charging current in fast
661 interrupt and start top-off charging mode.
665 - 100000 - 200000 (microamps), step by 25000 (rounded down)
666 - 200000 - 350000 (microamps), step by 50000 (rounded down)
667 - 0: disabled.
669 What: /sys/class/power_supply/max77693-charger/device/top_off_timer
675 charger operates in top-off charge mode. When the timer expires
676 the device will terminate top-off charge mode (charging current
681 - 0 - 70 (minutes), step by 10 (rounded down)
683 What: /sys/class/power_supply/bq24257-charger/ovp_voltage
688 This entry configures the overvoltage protection feature of bq24257-
695 - 6000000, 6500000, 7000000, 8000000, 9000000, 9500000, 10000000,
698 What: /sys/class/power_supply/bq24257-charger/in_dpm_voltage
704 bq24257-type charger devices. Once the supply drops to the configured
711 - 4200000, 4280000, 4360000, 4440000, 4520000, 4600000, 4680000,
714 What: /sys/class/power_supply/bq24257-charger/high_impedance_enable
719 This entry allows enabling the high-impedance mode of bq24257-type
726 - 1: enabled
727 - 0: disabled
729 What: /sys/class/power_supply/bq24257-charger/sysoff_enable
734 This entry allows enabling the sysoff mode of bq24257-type charger
736 is turned off in order to reduce the leakage from the BAT pin to less
742 - 1: enabled
743 - 0: disabled
747 Contact: linux-pm@vger.kernel.org
758 Contact: linux-pm@vger.kernel.org
764 Valid values: 1-12
768 Contact: linux-pm@vger.kernel.org
773 Valid values: 1-31