Lines Matching +full:max +full:- +full:speed

16 		The contents of the label are free-form.
52 		Voltage max value.
60 		Voltage critical max value.
135 		this voltage channel is being used for, and user-space
137 		user-space.
145 		When disabled the sensor read will return -ENODATA.
147 		- 1: Enable
148 		- 0: Disable
226 		affects the measurable speed range, not the read value.
247 		Desired fan speed
253 		Only makes sense if the chip supports closed-loop fan speed
254 		control based on the measured fan speed.
263 		this fan channel is being used for, and user-space doesn't.
264 		In all other cases, the label is provided by user-space.
272 		When disabled the sensor read will return -ENODATA.
274 		- 1: Enable
275 		- 0: Disable
287 		255 is max or 100%.
291 		Fan speed control method:
293 		- 0: no fan speed control (i.e. fan at full speed)
294 		- 1: manual fan speed control enabled (using `pwmY`)
295 		- 2+: automatic fan speed control enabled
304 		- 0: DC mode (direct current)
305 		- 1: PWM mode (pulse-width modulation)
334 		Number of trip points is chip-dependent. Use this for chips
345 		Number of trip points is chip-dependent. Use this for chips
358 		- 1: CPU embedded diode
359 		- 2: 3904 transistor
360 		- 3: thermal diode
361 		- 4: thermistor
362 		- 5: AMD AMDSI
363 		- 6: Intel PECI
369 		Temperature max value.
385 		Temperature hysteresis value for max limit.
390 		from the max value.
414 		Temperature critical max value, typically greater than
425 		- 0: OK
426 		- 1: temperature has reached tempY_crit
448 		Temperature emergency max value, for chips supporting more than
503 		this temperature channel is being used for, and user-space
505 		user-space.
541 		When disabled the sensor read will return -ENODATA.
543 		- 1: Enable
544 		- 0: Disable
566 		Current max value
642 		When disabled the sensor read will return -ENODATA.
644 		- 1: Enable
645 		- 0: Disable
838 		-ENODATA.
840 		- 1: Enable
841 		- 0: Disable
874 		-ENODATA.
876 		- 1: Enable
877 		- 0: Disable
885 		Unit: milli-percent (per cent mille, pcm)
895 		-ENODATA.
897 		- 1: Enable
898 		- 0: Disable
906 		Unit: milli-percent (per cent mille, pcm)
914 		Unit: milli-percent (per cent mille, pcm)
923 		- 0: OK
924 		- 1: intrusion detected
937 		- 0: disable
938 		- 1: enable
946 		- 0, off, n: disable
947 		- 1, on, y: enable