Lines Matching +full:dc +full:- +full:current +full:- +full:limit

16 		The contents of the label are free-form.
46 If voltage drops to or below this limit, the system may
66 If voltage reaches or exceeds this limit, the system may
135 this voltage channel is being used for, and user-space
137 user-space.
145 When disabled the sensor read will return -ENODATA.
147 - 1: Enable
148 - 0: Disable
253 Only makes sense if the chip supports closed-loop fan speed
263 this fan channel is being used for, and user-space doesn't.
264 In all other cases, the label is provided by user-space.
272 When disabled the sensor read will return -ENODATA.
274 - 1: Enable
275 - 0: Disable
293 - 0: no fan speed control (i.e. fan at full speed)
294 - 1: manual fan speed control enabled (using `pwmY`)
295 - 2+: automatic fan speed control enabled
304 - 0: DC mode (direct current)
305 - 1: PWM mode (pulse-width modulation)
334 Number of trip points is chip-dependent. Use this for chips
345 Number of trip points is chip-dependent. Use this for chips
358 - 1: CPU embedded diode
359 - 2: 3904 transistor
360 - 3: thermal diode
361 - 4: thermistor
362 - 5: AMD AMDSI
363 - 6: Intel PECI
385 Temperature hysteresis value for max limit.
396 Temperature hysteresis value for min limit.
425 - 0: OK
426 - 1: temperature has reached tempY_crit
437 Temperature hysteresis value for critical limit.
458 Temperature hysteresis value for emergency limit.
478 Temperature hysteresis value for critical min limit.
503 this temperature channel is being used for, and user-space
505 user-space.
541 When disabled the sensor read will return -ENODATA.
543 - 1: Enable
544 - 0: Disable
566 Current max value
574 Current min value.
582 Current critical low value
590 Current critical high value.
598 Current input value
606 Average current use
614 Historical minimum current
622 Historical maximum current
642 When disabled the sensor read will return -ENODATA.
644 - 1: Enable
645 - 0: Disable
651 Minimum rated current.
659 Maximum rated current.
776 If power use rises above this limit, the
824 If power rises to or above this limit, the
838 -ENODATA.
840 - 1: Enable
841 - 0: Disable
874 -ENODATA.
876 - 1: Enable
877 - 0: Disable
885 Unit: milli-percent (per cent mille, pcm)
895 -ENODATA.
897 - 1: Enable
898 - 0: Disable
906 Unit: milli-percent (per cent mille, pcm)
914 Unit: milli-percent (per cent mille, pcm)
923 - 0: OK
924 - 1: intrusion detected
937 - 0: disable
938 - 1: enable
946 - 0, off, n: disable
947 - 1, on, y: enable