Lines Matching full:attribute
12 Unless otherwise specified in an attribute description all attributes are optional
16 A file that can be read to obtain the type of attribute.
17 This attribute is mandatory.
25 All attribute types support the following values:
34 This attribute is mandatory.
68 increments of current_value this attribute accepts.
86 A file that can be read to obtain attribute-level
87 dependency rule. It says an attribute X will become read-only or
88 suppressed, if/if-not attribute Y is configured.
92 [ReadOnlyIf:<attribute>=<value>]
93 [ReadOnlyIfNot:<attribute>=<value>]
94 [SuppressIf:<attribute>=<value>]
95 [SuppressIfNot:<attribute>=<value>]
103 attribute is not "SelectDays" and its value will not be effective
111 attribute's current value will be forcefully changed based
116 <value>[ForceIf:<attribute>=<value>]
117 <value>[ForceIfNot:<attribute>=<value>]
152 This attribute is mandatory.
156 This attribute is mandatory.
175 The means of authentication. This attribute is mandatory.
191 This attribute is mandatory when mechanism == "password".
242 This attribute defaults to 'user' level
247 This attribute defaults to device 0.
253 The user writes to the attribute(s) with a BASE64 encoded string obtained
278 echo Enable > attribute/PasswordBeep/current_value
288 Read only attribute used to display the MD5, SHA1 and SHA256 thumbprints
292 Write only attribute used to switch from certificate based authentication
307 A read-only attribute reads 1 if a reboot is necessary to apply
308 pending BIOS attribute changes. Also, an uevent_KOBJ_CHANGE is
314 attribute changes applied
322 2. Before setting any attribute, check if it has any modifiers
324 attribute.
336 This attribute can be used to reset the BIOS Configuration.
354 Note that any changes to this attribute requires a reboot
362 This write only attribute can be used to send debug commands to the BIOS.
366 Note that any changes to this attribute requires a reboot for changes to take effect.