Lines Matching refs:Count
5 Count data of Count Y represented as a string.
11 Historical capture of the Count Y count data.
17 Count value ceiling for Count Y. This is the upper limit for the
24 Count value floor for Count Y. This is the lower limit for the
31 Count mode for channel Y. The ceiling and floor values for
32 Count Y are used by the count mode where required. The following
41 the Count Y ceiling value, while the lower limit is set
42 to the Count Y floor value. The counter freezes at
55 A count value boundary is set between the Count Y floor
56 value and the Count Y ceiling value. The counter is
57 reset to the Count Y floor value at count = ceiling when
58 counting up, while the counter is set to the Count Y
71 Discrete set of available values for the respective Count Y
79 Read-only attribute that indicates the count direction of Count
96 for Count Y. Suppose a counter device is used to count the total
113 Count function mode of Count Y; count function evaluation is
114 triggered by conditions specified by the Count Y signalZ_action
161 Count Y. If possible, this should match the name of the
168 Configure the prescaler value associated with Count Y.
193 Action mode of Count Y for Signal Z. This attribute indicates
195 evaluation for Count Y. The following action modes are